Elation KL PANEL XL User Manual page 14

ACCESSORY INSTALLATION
BARN DOOR INSTALLATION
1. Unlock both frame lock tabs using the latches located on each tab (circled in the image below).
Flip the top edge of the frame upward.
2. Look beneath the frame lock tabs and locate the installation slots on the inner edge of the frame.
The slot closest to the front of the device should be vacant. Carefully slide the barndoor into this
slot, then flip down the top edge of the frame and lock the frame lock tabs back in place.
3. With the barndoors locked securely in place, pull on the tabs at the edges of the barndoor
flaps to deploy the barndoors. Installation is now complete. Please note that the barndoor
accessory must be installed with its own safety cable! Refer to the diagram in the Fixture
Installation section of this manual.
14