Change The Presser Foot - Husqvarna VIKING Amber Air S 600 User Manual

Change the Presser Foot

Turn off the main power switch and unplug the machine.
A
Raise the presser foot.
Turn the handwheel toward you until the needles are at the
B
highest position.
Push the red button (A) on the back of the presser foot ankle
to release the presser foot.
Raise the presser foot to the extra lift position and the foot
C
will come off.
Place the new foot with the pin right underneath the groove
of the ankle while in the extra lift position (B). Lower the
presser foot and the foot will snap in place.
Tip: If you find it difficult to snap on the presser foot, push the red
button on the back of the ankle when lowering the foot (C).
2 Preparations 13