Adjustment Using The Precise Thread Control; Stitch Length Adjustments - Husqvarna VIKING Amber Air S 600 User Manual

Adjustment Using the Precise Thread
Control
If the loops do not form neatly around the fabric edge and
you have tried to adjust the tension and/or cutting width, the
Precise Thread Control will allow very small movements of
the stitch finger to compensate (see page 17).
A. If the loops extend outside the fabric edge, move the
PTC lever towards "-" (1). The stitch finger is moved
closer to the stitch plate and the loops are formed closer
to the fabric edge (2).
B. If the loops are too tight around the fabric edge, causing
the fabric to fold or get lumpy along the edge, move the
PTC lever towards "+" (1). The stitch finger is moved
further away from the stitch plate aligning better with the
fabric edge (2).

Stitch Length Adjustments

Stitch length is automatically set when selecting a stitch, but
you may wish to adjust it further, depending on the thread
and fabric being used as well as for the look you want for
your project. Adjust the stitch length to 4mm when sewing
on heavyweight fabrics. Adjust the stitch length to 2mm
when sewing on lightweight fabrics.
To adjust the stitch length, touch + or —. The value number
becomes highlighted, indicating that the standard setting has
been changed.
A
6 Stitch Adjustments
B
2
1
Stitch length icon
2
1
53