Start A Job; Simple Job Mode - Spraying Systems TeeJet Matrix 908 User Manual

Matrix 908 Field Computer

START A JOB

Once the power up sequence has completed, the
Start Job Menu will appear with the options to start
a new job, continue the last job, or open the job
manager to select a different job (options depend on
job mode and job availability). Once a job is active,
some setup options can no longer be changed. Close
the Job to change these settings.
REQUIREMENT: Setup for the specific vehicle and
its devices must be completed before starting
a job. See "No.2 Walk through the Vehicle
Wizard" on page 11 and "No.3 Set Up
Additional Devices" on page 12 for details.
To change between Simple Job mode and Advanced
Job mode, go to Main Menu-> Settings-> Console->
Job Mode. See "No.6 Select Job Mode" on page 18
for details on selecting a job mode.

Simple Job Mode

Use the Start Job menu to start a new job or continue
the last job. Only one job is available at a time.
Selecting a new job will delete any previous job.
Start a New Job
Continue the Last Job
Main Menu Button – access to the Settings
including wizards, Help options and
Universal Terminal (UT).
If the current GNSS Position is in a UTM zone other
than the current or adjacent UTM zone
be disabled.
20
www.teejet.com
Main Menu Button
will
Last Job
Simple Job Mode Start Job Menu