5 Set Up The Gnss - Spraying Systems TeeJet Matrix 908 User Manual

NO.5 SET UP THE GNSS
NOTE: These settings are required for rate control,
assisted/auto steering, and tilt sensor
operation, as well as proper implement
operation.
1. On the Main Menu , on the Settings Menu
select .
GNSS Receiver
, make adjustments to
2. Under
General Settings
settings as needed.
3. When available, under
Advanced Settings
adjustments to settings as needed.
4. Exit this screen to begin initializing the GNSS
receiver. A pop-up message will appear during the
initialization. This takes about a minute.
For more details on GNSS Receiver options, see
"Appendix A – GNSS Receiver Details" on page 34.
,
, make
Matrix 908 Field Computer
17
98-01578-EN R0