Table of Contents
Advertisement
14. Disclaimer
The MarS a.s. dedicated great care and attention to the development, laboratory testing, field testing and m
device properties. The
2
goal was, and still is, to provide users with maximum comfort and especially security in the use of the safety devices. All efforts are
directed to the cutter reliably cutting the closing loop of the reserve parachute when meeting the activation criteria.
Although the device will function properly when used, it does not guarantee the functioning of the other parts of the parachute
rig. The device itself does not exclude the possibility of serious injury or even death. In certain non-standard situations, the device
itself can be the cause of death. The device is only one of the ways to increase the likelihood of solving critical situations the user
may encounter while skydiving. Never rely solely on the security device. The basics of a safe jump are quality training, compliance
with safety rules, relevant health, mental ability, quality equipment from authorized manufacturers and the adoption of procedures
for dealing with emergency situations. Only by meeting these conditions can the likelihood of the safety device to solve emergency
situations be increased, if such should occur.
The safety device (AAD) is an electronic device and, like any other electronic device, may not always work properly, even providing
that it is properly installed and used. Using the appliance only reduces the risk of injury or even the death of the user. Should the user
still choose to use the device or put the unit at the disposal of another person to use, this act confirms they are aware of these risks
and the potential consequences associated with the use of the device. Even a properly functioning device may cause serious injury or
death!!!
By using the device, the user commits to use it as delineated in this manual. The manufacturer assumes no liability for damages arising
from failure to follow the delineated procedures.
The manufacturer MarS a.s. assumes no responsibility for any failures and any damages or consequences resulting from these failures.
If the user is not willing to accept these facts, the manufacturer recommends they not use the device.
36
Advertisement
Table of Contents
