Table of Contents
Advertisement
5. Installation
Control Unit
The cutter and the control unit location must comply with the harness manufacturer's manual so that in both cases at least
minimum cable spacing is ensured. Cable spacing reduces the probability of the device being damaged after packing and
during common use.
Carefully study the container manufacturer's manual prior to general installation.
For proper functioning of the m
Elastic pouch with Processing Unit
, the closing loop must be pulled through the cutter!!!
2
Cables must not be placed in the pocket for the device
body and, at the risk of cable damage, must not be even
partially under the device body.
18
Advertisement
Table of Contents
