Table of Contents
Advertisement
10. Technical Data
10.1
Basic Technical Data
Total weight ................................................................................................. approx. 220 g
Length, width, height of processing unit ......................................... approx. 85 mm x 45 mm x 23 mm
Length, width, height of control unit ................................................. approx. 63 mm x 18 mm x 5 mm
Thickness, length of cutter ..................................................................... approx. thickness 8 mm x length 66 mm
Cable length of control unit ................................................................... approx. 660 mm
Cable length of cutter .............................................................................. approx. 500 mm
Working temperature (inside device) ................................................ from 4°F (-20°C) to 131°F (+55°C)
Storage temperature (Recommended) ............................................. from 41°F (+5°C) to 77°F (+25°C)
Waterproof ................................................................................................... 24 hours in depths up to 2 m (6.5 ft)
Altitude adjustment of landing area (AGL) ..................................... +/- 990 m (+/- 2,990 ft)
Functioning period ...................................................................................14 hours from switch on
Lifetime ..........................................................................................................15 years, 5,000 flight hours or 15,000 jumps (20 minutes per jump)
Operating range below / above sea level ........................................ -500 m to +8,000 m (-1,640 ft to +26,200 ft)
10.2
Total Lifetime of m
and Batteries
2
The total lifetime of the AAD m
a maximum of 20 minutes from start-landing).
Upon the final assembly and complete function testing of each m
tion of battery capacity. If a new m
reading, which DOES NOT AFFECT THE TOTAL SPECIFIED SERVICE LIFE of the m
The m
device allows actual capacity in % to be displayed in order to enable simple inspection. As long as the battery capacity is over 0%,
2
the m
device will always provide reliable function. Upon reaching zero capacity, upon activation during calibration the device will display
2
a flashing icon with the letter „b" (battery), the device will still be functional.
Never use the m2 device with 0% battery capacity!!!
10.3
Cutter Lifetime
The total cutter lifetime is 16 years from the manufacture date. The cutter is marked with the year of manufacture and batch code.
Never use a cutter with expired lifetime.
is 15 years or a total of 5,000 flight hours, which is approximately 15,000 jumps (a jump is considered to be
2
device displays an actual battery capacity (menu letter „b") of 99% during inspection, it is an accurate
2
device, the device remains fully functional, including the actual deduc-
2
device.
2
32
Advertisement
Table of Contents
