Sequence To Display Menu - M2 AAD User Manual

Hide thumbs Also See for AAD:
Table of Contents

Advertisement

6. Control
The GRAVITY index is the maximum falling speed of the last jump in the activation zone expressed in percentage, while 100% is the activation
speed of the device version currently being used. After landing, the skydiver can check how close he got to the activation limit of the device
during the flight on the parachute. This information is important mainly for CP (Canopy Piloting), when parachute pilots reach high speeds in
minimum altitudes above the ground. A decision can be made according to this index, whether the EXPERT version is sufficient for the pilot or,
for example, SPEED is needed. The same absolute falling speed will mean a different GRAVITY index in various versions of the device. 100% is for
SPEED 45m/s (101 mph); for m
m
2
Atmospheric pressure in 0.1 hPa (5 digits = XXXXX) Example: digits 09867 mean pressure 986.7 hPa
6.7.2

Sequence to display MENU

Upon activating the m
2
Shortly press the control button (2) on the control unit body (1). The
After a short moment, a
displayed in the stated order (see chapter 6.4.1)
saved in the m2 memory under the selected icon will be displayed. Example:
Shortly press the control button (2) on the control unit body (1). The
the control button and successively the following icons will be displayed in the stated order
following icons will be displayed
and then the switched on device will be displayed
EXPERT and m
TANDEM, 35 m/s (78 mph); for m
2
2
as per chapter 6.1, the display will show icon
icon will be displayed – immediately press the control button and successively the following icons will be
STUDENT, 13 m/s (29 mph). Be aware of these differences!
2
or
or
icon will be displayed; do not press anything now, wait.
icon will be displayed, and next icon
(according to chapter 6.4.1 it means that the remaining battery capacity is 99 %)
. All values are shown only. Non of the values in the menu can be changed.
or
, depending on the selected mode.
. By clicking on one of them, the values
, immediately press
, successively the
24

Advertisement

Table of Contents
loading

Table of Contents