Heat Sink; Removing Heatsink Assembly - Dell OptiPlex 3060 Tower Service Manual

4. Close the front panel
5. Install the:
a. Front bezel
b. Side cover
6. Follow the procedure in

Heat sink

Removing heatsink assembly

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To remove the heatsink assembly:
a. Disconnect the heatsink fan assembly cable from the connector on the system board [1].
b. Loosen the captive screws (4) that secure the heatsink assembly to the system board [2].
NOTE: Remove the screw in the sequential order (1,2,3,4) as printed on the system board.
c. Lift the heatsink assembly away from the computer [3].
door.
After working inside your
Before working inside your
door.
computer.
computer.
Removing and installing components 57