2. Close the
front panel
3. Install the:
a.
Front bezel
b.
Side cover
4. Follow the procedure in
Optical drive
Removing optical drive
1. Follow the procedure in
2. Remove the:
a.
Side cover
b.
Front bezel
3. Open the
front panel
4. To remove the optical drive assembly:
a. Disconnect the optical drive data cable and power cable from the connectors on the optical drive [1].
NOTE:
You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect the cables
from the connectors.
b. Close the
front panel door
door.
After Working Inside Your
Before working inside your
door.
[2].
Computer.
computer.
Removing and installing components
27