Installing The Wlan Card; Heat Sink; Removing The Heat Sink - Dell W14B Owner's Manual

Installing the WLAN card

1. Align the WLAN card to the connector on the system board.
2. Tighten the screw to secure the WLAN card to the system board.
3. Connect the antenna cables to the connectors on the WLAN card.
4. Install the:
a. system board shield
b. back cover
c. stand
5. Follow the procedure in

Heat sink

Removing the heat sink

1. Follow the procedure in
2. Remove the:
a. stand
b. back cover
c. system board shield
3. To remove the heat sink:
a. Remove the screws that secure the heat sink to the chassis [1, 2].
b. Lift the heat sink away from the computer [3].
24 Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.