Heat Sink Fan; Removing Heat Sink Fan - Dell OptiPlex 3060 Tower Service Manual

3. Close the front panel
4. Install the:
a. Front bezel
b. Side cover
5. Follow the procedure in

Heat sink fan

Removing heat sink fan

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To remove the heatsink fan assembly:
a. Disconnect the heatsink fan assembly cable from the connector on the system board [1].
b. Remove the screws that secure the fan to the heat sink [2].
NOTE: Ensure to insert the Torx screw driver from top screw hole to remove the screws.
c. Lift the heatsink fan away from the computer [3].
door.
After working inside your
Before working inside your
door.
computer.
computer.
Removing and installing components 55