Removing The 2.5-Inch Hard Drive Assembly - Dell OptiPlex 3060 Tower Service Manual

4. Install the:
a. Front bezel
b. Side cover
5. Follow the procedure in
Removing the 2.5–inch hard drive assembly
1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To remove the hard drive assembly:
a. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive [1].
b. Press the blue tabs of the assembly on both sides [2] and pull the hard drive assembly out of the system [3].
24 Removing and installing components
After working inside your
Before working inside your
door.
computer.
computer.