Removing The 2.5-Inch Drive From The Drive Bracket - Dell OptiPlex 3060 Tower Service Manual

Removing the 2.5–inch drive from the drive bracket
1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
c. 2.5-inch hard drive assembly
3. To remove the drive:
a. Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1].
b. Lift the drive out of the drive bracket [2].
c. Remove the drive from the bracket [3].
Before Working Inside Your Computer.
Removing and installing components 25