Hard Drive Assembly-3.5-Inch And 2.5-Inch; Removing 3.5-Inch Hard Drive - Dell OptiPlex 3060 Tower Service Manual

2. Install the:
a. Front bezel
b. Side cover
3. Follow the procedure in
Hard drive assembly—3.5-inch and 2.5-inch
Removing 3.5–inch hard drive
1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. To remove the hard drive:
a. Disconnect the SATA cable and the power cable from the connectors on the hard drive [1].
b. Remove the four screws that secure the 3.5 inch HDD to the front panel door [2].
c. Open the front panel door [3].
20 Removing and installing components
After working inside your
Before working inside your
computer.
computer.