Intrusion Switch; Removing Intrusion Switch - Dell OptiPlex 3060 Tower Service Manual

2. Close the front panel
3. Install the:
a. Front bezel
b. Side cover
4. Follow the procedure in

Intrusion switch

Removing intrusion switch

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To remove the intrusion switch:
a. Disconnect the intrusion switch cable from the connector on the system board [1].
b. Unroute the intrusion switch cable from the fan grommets [2].
c. Slide the intrusion switch and push it to remove from the computer [3].
door.
After working inside your
Before working inside your
door.
computer.
computer.
Removing and installing components 45