Removing and installing Field Replaceable
The replaceable components in this chapter are Field Replaceable Units (FRUs).
CAUTION:
The information in this removing and installing FRUs section is intended for authorized service
technicians only.
CAUTION:
To avoid any potential damage to the component or loss of data, ensure that an authorized service
technician replaces the Field Replaceable Units (FRUs).
CAUTION:
Dell Technologies recommends that this set of repairs, if needed, to be conducted by trained
technical repair specialists.
CAUTION:
As a reminder, your warranty does not cover damages that may occur during the courses of FRU
repairs that are not authorized by Dell Technologies.
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Heat sink
Removing the heat sink- UMA
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
Before working inside your
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
system-board
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
computer.
shield.
Removing and installing Field Replaceable Units (FRUs)
Units (FRUs)
6
71