System Fan; Removing System Fan - Dell OptiPlex 3060 Tower Service Manual

4. Install the heatsink assembly.
5. Close the front panel
6. Install the:
a. Front bezel
b. Side cover
7. Follow the procedure in

System fan

Removing system fan

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel
4. To remove the system fan:
a. Disconnect the intrusion switch cable from the connector on the system board [1].
b. Unroute the intrusion switch cable from the fan grommet [2].
door.
After working inside your
Before working inside your
door.
computer.
computer.
Removing and installing components 61