Hard-Drive Assembly; Removing The 2.5-Inch Hard-Disk Drive Assembly - Dell OptiPlex 3080 Tower Service Manual

Steps
1. Position the fan duct to align it with the slots on the computer chassis.
2. Press the fan duct until it clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Hard-drive assembly

Removing the 2.5-inch hard-disk drive assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the 2.5-inch hard-disk drive assembly and provide a visual representation of the
removal procedure.
24 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.