3.5-Inch Hard-Drive Assembly; Removing The 3.5-Inch Hard-Disk Drive Assembly (Bay-1) - Dell Precision 3660 Tower Service Manual

Steps
1. Pry the retention tabs to release the front bezel from the computer.
2. Slightly pull the front bezel and gently rotate to release the other tabs on the bezel from the slots in the computer chassis.
3. Remove the front bezel from the computer.

3.5-inch hard-drive assembly

Removing the 3.5-inch hard-disk drive assembly (Bay-1)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 3.5-inch hard-disk drive assembly and provide a visual representation of the
removal procedure.
16 Removing and installing components
before working inside your computer.