Issue
Burning firmware on a secure device fails
with one of the following messages:
•
-E- Burning FS3 image failed:
Rejected authentication
•
The FW image is not secured
•
The key is not applicable
Secure Firmware fails when using mstflint
brom and drom commands.
When the CR space is in read only mode,
the tracers may demonstrate an
unexpected behavior.
Applying token on the device fails with one
of the following messages:
•
Component is not applicable
•
The manufacturing base MAC was
not listed
•
Mismatch FW version
•
Mismatch user timestamp
•
Rejected forbidden version
Burning the firmware using the "--
use_dev_rom" flag has no effect and the
ROM is replaced with the one on the
image.
Cause
The image was not secured in a
the proper way.
mstflint brom and drom
commands are not supported.
A writing permission is required
for them to work properly.
The token was not generated or
signed in the proper way.
Controlled firmware does not
support changing boot image
component.
Solution
Ask for a secure
image with the right
keys that match the
device.
N/A
N/A
Generate and sign
tokens.
Use "--no_fw_ctrl".
99