Using Mstconfig; Using Mstconifg With Pci Device In Bus Device Function (Bdf) Format; Using Mstconfig To Set Vpi Parameters - Nvidia MSTFLINT Manual

# mstconfig -d 41:00.0
Reset configuration
Applying... Done!
-I- Please power-cycle device to load
>mstconfig 41:00.0
Device 1:
----------
Device type: ConnectX-3
PCI Device: 41:00.0
Configurations:
SRIOV_EN
NUM_OF_VFS
WOL_MAGIC_EN_P1
WOL_MAGIC_EN_P2

Using mstconfig

Using mstconifg with PCI Device in Bus Device Function
(BDF) Format
Example:
# mstconfig -d 41:00.0
Device 1:
----------
Device type:
PCI Device:
Configurations:
SRIOV_EN
NUM_OF_VFS
WOL_MAGIC_EN_P1
WOL_MAGIC_EN_P2

Using mstconfig to Set VPI Parameters

In order to set VPI parameters through mstconfig, use the following command line:
# mstconfig -d <device> set [LINK_TYPE_P1=<link_type>]
[LINK_TYPE_P2=<link_type>]
Example: Configuring both ports as InfiniBand:
reset
for device 41:00.0? ? (y/n) [n] : y
query
Next Boot
True(1)
8
False(0)
False(0)
ConnectX-3
41:00.0
Next Boot
True(1)
16
False(0)
False(0)
new configurations.
26