Nvidia MSTFLINT Manual page 113

mst Added support for adding remote devices in mst remote when the
target machine does not have an MST kernel loaded.
mstcables Added the option to dump the data from all readable pages.
Added support for burning cable firmware on In Service Firmware
Update (ISFU) supporting cables.
Added support to access the cable via the MTUSB, when the cable is
connected to a compatible board.
mstfwreset Added support for MultiHost platforms.
Rev. 4.6.0
Adapter Cards Added support for ConnectX-5/ConnectX-5 Ex adapter cards.
Note: ConnectX-5/ConnectX-5 Ex adapter cards are currently at Beta
level.
mstconfig Added an option to query active (current) configurations in mstconfig.
Added new parameters in VPI settings configuration: XFI_MODE,
PHY_TYPE, FORCE_MODE
Added a new parameter to the PCI configuration
NON_PREFETCHABLE_PF_BAR
mstburn Added the ability to use mstvpd to read the device VPD when using
mstburn.
fwreset Added support for fwreset in PPC64 and PPC64LE platforms.
Rev. 4.5.0
General Added support for Innova IPsec 4 Lx EN /Innova Flex 4 Lx EN
mstflint package size has been reduced in Linux by separating the
architecture specific RPMs, and in ESXi, by moving relevant tools to
the OEM package.
mstcables Enhanced cable query capabilities. Added the additional registers
below for debug purposes when running the query (-q) flag:
• device technology
• identifier
• wavelength/attenuation
• speed/compliance
Linux
All
All
All
All
All
All
Linux,
Windows,
VMware
ESXi
Linux
Linux
Linux /
ESXi
All
113