Release Notes Document History; Mstflint Release Notes Change Log History - Nvidia MSTFLINT Manual

Release Notes Document History

mstflint Release Notes Change Log History

Component /
Tool
mstresourcedu Added support for "--virtual-hca-id" command. Now the tool can
mp provide info on the virtual HCA (host channel adapter, NIC) ID.
For further information see
mstlink HDR lane rate is now supported when in Pseudorandom Binary
Sequence (PRBS) mode.
mstreg Increased the registry keys the tool supports and now it exposes the
full PRM. For additional information, refer to the PRM.
mstconfig BOOT_INTERRUPT_DIS parameter was added to mlxconfig. When
TRUE, legacy interrupts should not be used for receive/transmit
indication. Polling should be used instead.
Note: This is supported only if
boot_legacy_interrupt_disable_supported is set to TRUE.
mstflint Enables the user to to insert information manually to the flash on
components such as MFG/DEV GUID/MAC when no information
exists after the burn process using the command
<device> sg <guid>"
the existing GUID/MAC information will be used instead.
mstflint Enables the user to query the MFA2 file using a PSID. For additional
(Querying the information, refer to
MFA2 File)
mstlink Added supported for switching between NRZ/PAM4 speeds for new
devices that support HDR/200G speeds (ConnectX-6, ConnectX-6
Dx, Mellanox Quantum, Mellanox Spectrum 2).
Description
Rev. 4.14.0-1
resourcedump Utility
. If the information is not inserted manually,
Querying the MFA2 File.
Rev. 4.13.3-2
Operating
Linux
All
All
All
All
"mstflint -d
All
All
System
105