Nvidia MSTFLINT Manual page 41

Feature
1
Keep Link Up
Parameter
DCBX_IEEE_P2
Enable DCBX in IEEE mode.
DCBX_WILLING_P1
Allow the NIC to accept DCBX
configuration from the remote peer.
DCBX_WILLING_P2
Allow the NIC to accept DCBX
configuration from the remote peer.
KEEP_ETH_LINK_UP_P1 /
KEEP_ETH_LINK_UP_P2
When set, the NIC keeps the link up as
long as the server is not in standby
mode (Ethernet only).
KEEP_IB_LINK_UP_P1 /
KEEP_IB_LINK_UP_P2
When set, the NIC keeps the link up as
long as the server is not in standby
mode (InfiniBand only).
KEEP_LINK_UP_ON_BOOT_P1 /
KEEP_LINK_UP_ON_BOOT_P2
When set, the NIC keeps the link up as
long as the server is not in standby
mode and a driver is not initialized.
KEEP_LINK_UP_ON_STANDBY_P1 /
KEEP_LINK_UP_ON_STANDBY_P2
When set, the NIC keeps the link up
from power-up until the server is
turned on, and when the server is in
standby mode.
DO_NOT_CLEAR_PORT_STATS_P1/
DO_NOT_CLEAR_PORT_STATS_P2
When set, the port statistic counters
are not cleared on first host init. When
cleared the port statistics are cleared
on first host init
Values
False: Disable
True: Enable
False: Disable
True: Enable
False: Disable
True: Enable
False
True
False
True
False
True
False
True
False
True
41