Nvidia MSTFLINT Manual page 89

--serdes_tx <params>
--serdes_tx_lane <transmitter_lane>
--database
--test_mode <prbs_mode>
--rx_prbs <rx_prbs_mode>
--tx_prbs <tx_prbs_mode>
--rx_rate <rx_lane_rate>
--tx_rate <tx_lane_rate>
-b |--ber_collect <csv_file>
--ber_limit <limit_criteria>
--iteration <iteration>
--pc
--set_external_phy
--twisted_pair_force_mode
<twisted_pair_force_mode>
Examples:
Get info of <device>, <port_number>:
mstlink -d <device> -p <port_number>
Get info of <device>, <port_number> and BER Counters:
mstlink -d <device> -p <port_number> -c
Get info of <device>, <port_number> and Transmitter Parameters:
mstlink -d <device> -p <port_number> --show_serdes_tx
Configure Port State:
mstlink -d <device> -p <port_number> --port_state UP
Configure Port Speeds:
mstlink -d <device> -p <port_number> --speeds 25G,50G,100G
Configure Transmitter Parameters
[polarity,ob_tap0,...]
Transmitter Lane to Set (Optional - Default All
Lanes)
Save Transmitter Configuration for Current Speed
Permanently (Optional)
Physical Test Mode Configuration [EN(enable)/
DS(disable)/TU(perform tuning)]
RX PRBS Mode [PRBS31(Default)/PRBS7/...]
(Optional - Default PRBS31)
TX PRBS Mode [PRBS31(Default)/PRBS7/...]
(Optional - Default PRBS31)
RX Lane Rate [EDR(Default)/25G/10G/...] (Optional -
Default 25G)
TX Lane Rate [EDR(Default)/25G/10G/...] (Optional -
Default 25G)
Port Extended Information Collection [CSV File]
BER Limit Criteria [Nominal(Default)/Corner/Drift]
(Optional - Default Nominal)
Iteration Number of BER Collection
Clear Counters
Set External PHY
Twisted Pair Force Mode [MA(Master)/SL(Slave)]
89