Table of Contents
Advertisement
Settings: Password, Hot KEY, Mouse Left, Mouse Right, BUTTON ONLY
and Keyboard 98.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in
the field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assign a hot key combina-
tion in the field for the PS/2 keyboard to power on the system. Settings: Ctrl-
F1 through Ctrl-F12.
Onboard FDC Controller
The item is used to enable or disable the onboard Floppy controller. Select
Enabled when you have installed a floppy disk drive and want to use it.
Onboard Serial Port 1/2
The items specify the base I/O port address and IRQ for the onboard Serial Port
1 (COM A)/Serial Port 2 (COM B). Selecting Auto allows BIOS to automatically
determine the correct base I/O port address. Settings: Disabled, 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and Auto.
UART Mode Select
The field allows you to specify the operation mode for serial port "COM B".
Settings are:
IrDA:
ASKIR :
Normal:
RxD, TxD Active
The item determines the active of RxD, TxD. Settings are "Hi, Hi", "Hi, Lo",
"Lo, Hi" and "Lo, Lo".
IR Transmission Delay
The field enables or disables IR transmission delay function. Settings: En-
abled and Disabled.
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
RS-232C Serial Port
3-19
®
AWARD
BIOS Setup
Advertisement
Table of Contents
