Table of Contents
Advertisement
Chapter 2
Central Processing Unit: CPU
The mainboard supports Intel
®
and Pentium
III (Tualatin) processors. It uses a CPU socket called Socket
370 for easy CPU installation. Make sure the CPU has a Heat Sink and a
cooling fan attached on the top to prevent overheating. If you do not find
the Heat Sink and cooling fan, contact your dealer to purchase and install
them before turning on the computer.
CPU Installation Procedures
1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
2. Look for the gold arrow.
The gold arrow should point
towards the end of lever.
The CPU will only fit in the
correct orientation.
3. Hold the CPU firmly, and
then press the lever down to
complete the installation.
Overheating will seriously damage the CPU
and system, always make sure the cooling fan can work
properly to protect the CPU from overheating.
WARNING!
®
Celeron™/Celeron™ (0.13 process)
Sliding
Plate
2-2
Open Lever
Gold Arrow
Close
Lever
Advertisement
Table of Contents
