MSI MS-6395 Manual page 39

Note: To have the Line-out connector on the back panel work
properly, you need to place the jumper on pin# 11~14 of the J10
connector or on pin#5~6 and 9~10 of the JAUDIO1 connector.
Otherwise, this Line-out connector will not function and nothing
can be heard through speakers or headphones attached to the
connector. But front panel audio connector is enabled at this
point and allows you to connect speakers or headphones.
13 11
17
J10
14
18
(OPEN pin# 11~14)
9
JAUDIO1
10
(OPEN pin# 5~6 and 9~10)
- Disable Line-out connector on
the back panel
- Enable Front Panel Audio
Connector
1
12
2
1
5
6
2
2-23
Hardware Setup
17
13 11
14 12
18
(SHORT pin# 11~14)
9 5
10 6
(SHORT pin# 5~6 and 9~10)
- Enable Line-out connector on the
back panel
- Disable Front Panel Audio
Connector
1
2
1
2