MSI MS-6395 Manual page 58

Chapter 3
APIC Mode
This field is used to enable or disable the APIC (Advanced Programmable
Interrupt Controller). Due to compliance to PC2001 design guide, the system
is able to run in APIC mode. Enabling APIC mode will expand available IRQs
resources for the system. Settings: Enabled and Disabled.
MPS Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification)
version to be used for the operating system. You need to select the MPS
version supported by your operating system. To find out which version to
use, consult the vendor of your operating system. Settings: 1.4 and 1.1.
OS Select For DRAM > 64MB
®
This allows you to run the OS/2 operating system with more than 64MB
®
DRAM. When you choose Non-OS2, you cannot run the OS/2 operating
system with more than 64MB DRAM. But it is possible if you choose OS2.
HDD S.M.A.R.T. Capability
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis &
Reporting Technology) capability for the hard disks. S.M.A.R.T is a utility
that monitors your disk status to predict hard disk failure. This gives you an
opportunity to move data from a hard disk that is going to fail to a safe place
before the hard disk becomes offline. Settings: Enabled and Disabled.
Report No FDD For WIN95
®
This function is used only when you are testing HCT for Windows 95 Logo
certification.
3-12