Advertisement
Any maintenance operations, except of those specifically described within this manual, must
only be carried out by the manufacturer or an authorized service partner.
Equipment
The mobile belt saw is supplied ready to use, packed in a cardboard box and protected by a sheet of
cardboard. The packaging material must be disposed according to current environmental protection
regulations. The machine is initially supplied with the instruction manual.
Note:
The belt saw has been designed and manufactured for bench use. The metal parts being cut
may have a maximum diameter or thickness of 105 mm.
Any other use is excluded by the manufacturer who shall be exempt from any liability for dam -
age to people, animals or the machine itself caused by improper use.
Do not run the machine for a longer period of time, when no parts have to be cut.
Do not cut hardened or cemented steel parts.
Machine
Identification
The essential information for identifying the product includes:
◦ Manufacturer
◦ Serial number
◦ Model
◦ Year of manufacture
◦ Voltage (V)
◦ Power (kW)
◦ Frequency (Hz)
◦ Amperes (A)
◦ Weight (kg)
The EC approval plate is located as shown in figure 2, reference A. It is strictly forbidden to re -
move or damage the plates. Immediately contact the manufacturer or an authorized service
partner if this should happen.
For any information and/or technical explanations regarding the machine, always indicate:
◦ Model
◦ Serial number
◦ Item number (of seller)
◦ Order number
Description
The portable bench saw consists of a fixed bench, pivoting head (including a screw lock for
angle sawing), speed regulator, piece clamp and operator tool.
The machine may be used for dry cutting (from 0° to 45° left) of materials compatible with the
specifications listed below always in compliance with environmental conditions and limitations
recommended by the manufacturer as well as current health and safety regulations.
CAUTION:
The description specifies the use for which this product has been designed and built. Any
other use or failure to comply with the technical parameters listed below may lead to hazardous situ-
ation including the risk of injury to people and property.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61917
Page 4
02
2021-1
Advertisement
