Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec VSC206
Summary of Contents for Trotec VSC206
- Page 1 VSC206 OPERATING MANUAL VIDEOSCOPE...
-
Page 2: Table Of Contents
Do not use the device in potentially explosive areas. Never use material damage), but does not indicate hazards. the device on persons or animals. Trotec accepts no liability for damages resulting from improper use. In such a case, any Info warranty claims will be voided. - Page 3 The device is not a toy and does not belong in the hands of children. Warning Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications! Caution Keep a sufficient distance from heat sources. videoscope VSC206...
-
Page 4: Information About The Device
The recordings and measurements can be stored on an SD card and transmitted via a USB interface. Device depiction Designation Display Power button Probe cable Camera head with 4-way articulation Battery compartment with battery holder Operating elements with joystick Photo/OK button USB interface HDMI interface SD card slot videoscope VSC206... - Page 5 Zoom button (video) Joystick 22 Rotation Is used to mirror the camera display and to turn it upside down Brightness button 23 Lamp illumination Menu button 24 SD card indicates whether an SD card is Up/Down button inserted videoscope VSC206...
- Page 6 Type of protection IP65 (IP 67 optional) (The device can be used (housing) in oil, light oil and water with a salt content of 5 %) Physical characteristics Construction ABS housing with integrated bumpers Dimensions 280 x 90 x 152 mm Weight 590 g (incl. batteries) videoscope VSC206...
-
Page 7: Transport And Storage
Scope of delivery Operation • 1 x Videoscope VSC206 Inserting the batteries • 4 x NI-MH batteries, 1.2 V • 1 x Transport case Note Make sure that the surface of the device is dry and the • 1 x Power adapter device is switched off. - Page 8 3. Press the Zoom button (13) to enlarge the picture. ð 2-, 3- or 4- fold zoom is possible by pressing the Zoom button (13) several times. 4. Press the video button (12). ð The picture view is stopped. ð The videoscope switches back to recoding mode. videoscope VSC206...
-
Page 9: Software
ð The settings are made as described for the year. ð Repeat the procedure for the day format or for the hours/minutes format. 6. Press the Photo/OK button (7). ð The settings are saved and the selection menu is displayed. videoscope VSC206... - Page 10 4. Use the Up/Down button (17) to select the desired resolution: ð Press 1280*720 to set a high resolution. ð Press 960*720 to set a normal resolution. ð Press 640*720 to set a low resolution. 5. Confirm the selection by pressing the Photo/OK button (7). videoscope VSC206...
- Page 11 ð The process will be executed and the selection menu 1. Press the Menu button (16). will be displayed. ð The selection menu will be displayed. ð The current signal type of the device is displayed. This parameter cannot be changed. videoscope VSC206...
- Page 12 ð Pressing No cancels the operation and the device will not be reset to factory settings. 4. Confirm the selection by pressing the Photo/OK button (7). ð The process will be executed and the selection menu will be displayed. videoscope VSC206...
-
Page 13: Errors And Faults
EU countries on the website is supplied with power. If this is the case but the screen https://hub.trotec.com/?id=45090. Otherwise, please contact an still remains dark, the CCD chip may be damaged. official recycling centre for electronic and electrical equipment •... - Page 14 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...