Improper use Do not use the device in potentially explosive areas. Never use the device on persons or animals. Trotec accepts no liability for damages resulting from improper use. In such a case, any warranty claims will be voided. Any unauthorised modifications, alterations or structural changes to the device are forbidden.
Page 3
The device is not a toy and does not belong in the hands of children. Warning Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications! Caution Keep a sufficient distance from heat sources. videoscope VSC206...
USB interface. Device depiction Designation Display Power button Probe cable Camera head with 4-way articulation Battery compartment with battery holder Operating elements with joystick Photo/OK button USB interface Power adapter connection AV output SD card slot videoscope VSC206...
Page 5
(photo/video) Battery battery state of charge Designation Zoom current zoom factor Play button Time/date stamp indicates the current date/time Video button SD card SD card inserted Zoom button Joystick Brightness button Menu button Up/Down button videoscope VSC206...
Page 6
Weight 590 g (incl. batteries) Scope of delivery • 1 x Battery charger with mains plug • 1 x Videoscope VSC206 • 1 x Quick guide • 4 x NI-MH batteries, 1.2 V • 1 x SD card • 1 x Transport case •...
4. Close the rubber tab. Switching on and off 1. Briefly press the Power button (2). ð The display is switched on. ð The device is ready for operation. 2. Press the Power button (2) for approx. 3 seconds. ð The device switches off. videoscope VSC206...
Page 8
ð Press the Play button (12) to play a video or, if ð The selected action is executed. necessary, to pause. ð The videoscope switches to picture view. 3. Press the video button (13). ð The picture view is stopped. ð The videoscope switches back to recoding mode. videoscope VSC206...
ð The settings are made as described for the year. 5. Confirm the selection by pressing the Photo/OK button (7). 6. Repeat steps 4. and 5. until time and date are set. 7. Press the Photo/OK button (7). ð The settings will be saved. videoscope VSC206...
Page 10
5. Confirm the selection by pressing the Photo/OK button (7). 5. Confirm the selection by pressing the Photo/OK button (7). ð The process will be executed and the selection menu ð The time stamp will be set and the selection menu will will be displayed. be displayed. videoscope VSC206...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. videoscope VSC206...
Page 13
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...