Table of Contents
Advertisement
Available languages
Available languages
EN
Whisk
Frothing & Heating milk/Heating milk:
•
Press the 0n/0ff button to start. The red indicator lights will illuminate to show that the unit is in
operation.
Frothing cold milk:
•
Press and hold the 0n/0ff button for a further 1-2 seconds to switch cycles, only the blue light
will remain on.
Tips
•
To protect the electric circuit, it has been set up that users need to wait for 3 seconds to turn on
the appliance after the current is switched on.
•
Use whole milk for best results (fat content>3.0%)
•
Milk heats to approximately 65+/-5 C. This is the ideal temperature, as it ensures the flavor of
the coffee is not impaired.
•
Keep the whisks in a safe place, because they are small they can be easily misplaced.
•
After each froth/heat wait 2 minutes to allow the thermostat to rest. After 2 minutes the Milk
Frother can be used again. To shorten this time, rinse with cold water and wipe dry after each
use.
•
This Milk Frother is designed to heat plain milk only.
3
1
Function
Frothing Cold Milk
Frothing & Heating
Heating (a small amount of
froth)
2
Min capacity
Max. capacity
100ml
130ml
100ml
130ml
100ml
300ml
3
Time(approx)
~110s
~60-180s
~60-180s
Advertisement
Table of Contents
