Prowax Minifit Filter; Replace Prowax Minifit Filter - oticon CROS PX miniRITE R Instructions For Use Manual

ProWax miniFit fi lter
The dummy speaker has a white wax filter
attached to the end with the earpiece. The
wax filter keeps wax and debris out of the
dummy speaker. It has no acoustic purpose.
Replace the filter for hygienic reasons
when clogged.
Remove the earpiece from the dummy
speaker before replacing the wax filter.
IMPORTANT NOTICE
Ensure you always use the same type of wax filter as was originally supplied
with the transmitter. If you are in any doubt about the use or replacement of
wax filters, contact your hearing care professional.
28 About Getting started Daily use
Wax filter
Warnings More info
Replace ProWax miniFit fi lter
1. Tool 2. Remove
New
filter
Remove the tool from Insert the empty pin
the shell. The tool has into the wax filter in
two pins, one empty the dummy speaker
for removal and one and pull it out.
with the new wax
filter.
3. Insert
New
filter
Final
Old
filter
Empty
pin
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
29