Filter Replacement; Replace Prowax Minifit Filter - oticon IIC Instructions For Use Manual

Filter replacement

The fi lters keep wax and debris from damaging the hearing aid.
If the fi lters becomes clogged, please replace the fi lters or contact
your hearing care professional.
• ProWax miniFit filter protects the sound outlet.
• O-cap and T-cap protect the microphone inlet.
Please refer to the following pages for instructions on how to replace the
appropriate fi lters.
IMPORTANT NOTICE
Ensure you always use the same type of wax fi lter as was originally supplied
with the hearing aids.
If you are in doubt about the use or replacement of ProWax miniFit fi lters,
contact your hearing care professional.
26 About Getting started Daily use Options Tinnitus Warnings More info
Replace ProWax miniFit fi lter
1. Tool 2. Remove
New
fi lter
New
fi lter
Remove the tool from Push the empty pin
the shell. The tool has into the ProWax miniFit
two pins, one empty fi lter in the hearing aid
for removal and one and pull it out.
with the new ProWax
miniFit fi lter.
3. Insert
New
fi lter
Old fi lter
Old fi lter
Insert the new ProWax
miniFit fi lter using the
other pin, remove the
tool and throw it out.
27