Turn Transmitter On / Off Using The Charger - oticon CROS PX miniRITE R Instructions For Use Manual

Hide thumbs Also See for CROS PX miniRITE R:
Table of Contents

Advertisement

Turn transmitter ON / OFF using the charger

Your transmitter automatically turns ON when removed from the
charger.
The transmitter LED light turns GREEN after approximately two
seconds. Wait until the transmitter LED light blinks GREEN twice,
confirming it is ready for use.
Your transmitter automatically turns OFF when placed in the charger
and starts charging. The transmitter LED light turns ORANGE.
IMPORTANT NOTICE
If applicable, ensure that your charger is powered or that the charger's built-in
battery is charged when the transmitter is seated in the charging port. For more
information, see your charger's instructions for use.
14
About
Getting started
Daily use Warnings More info
Turn transmitter ON / OFF using the push button
The transmitter can be turned ON / OFF using the push button.
To turn ON
Press and hold the lower part of the push button for
approximately two seconds until the transmitter LED
light turns GREEN. Release the push button and wait
until the transmitter LED light blinks GREEN twice.
The transmitter is now turned ON.
To turn OFF
Press and hold the lower part of the push button for
approximately three seconds until the transmitter
LED light turns ORANGE. The transmitter plays four
descending tones. Release the push button. The
transmitter is now turned OFF.
For information regarding tones, see the Sound and LED light
indicators section.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bicros

Table of Contents