Technical Information - oticon CROS PX miniRITE R Instructions For Use Manual

Technical information

The transmitter contains a radio
transceiver that uses short-range
magnetic induction technology
working at 3.84 MHz. The magnetic
field strength of the transmitter is
very weak and is always below 15 nW
(typically below –40 dBμA/m at a
distance of 10 meters (–12.20 dBμA/ft
at a distance of 33 feet)).
The transmitter complies with
international standards concerning
electromagnetic compatibility and
human exposure.
Only use your transmitter in areas where
wireless transmission is permitted.
Due to the limited space available on the
transmitter, relevant approval markings
can be found in this booklet.
48 About Getting started Daily use Warnings
Additional information can be found
in the Technical Data Sheet on
www.oticon.global
USA and Canada
This device contains a radio module
(DA AU5 MNR R) with the following
certification ID numbers:
FCC ID: 2ACAHAU5MRTRC
IC: 11936A-AU5MRTRC
More info
Radio frequency radiation
exposure information
For body-worn operation, this device
meets FCC and Innovation, Science
and Economic Development Canada's
RF exposure limits and has been tested
while in contact with the human body.
Use of other accessories not verified
by the manufacturer may not ensure
compliance with FCC and Innovation,
Science and Economic Development
Canada's RF exposure guidelines. the
device must not be co-located or used
in conjunction with any other antenna
or transmitter.
Note:
The device complies with Part 15
of the FCC rules and with Innovation,
Science and Economic Development
Canada's license-exempt RSSs standards.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
49