Prowax Minifit Filter - oticon miniRITE R Instructions For Use Manual

ProWax miniFit fi lter
The speaker has a white wax filter
attached to the end where the earpiece
is attached. The wax filter keeps earwax
and debris from damaging the speaker.
Ensure you replace the filter when
clogged, or if the hearing aid does not
sound normal. Alternatively, contact your
hearing care professional. Ensure you
remove the earpiece from the speaker
before replacing the wax filter. To do this,
see the Replace standard earpieces
section.
IMPORTANT NOTICE
Ensure you always use the same type of wax filter as originally supplied
with the hearing aid. If you are in doubt about the use or replacement of wax
filters, contact your hearing care professional.
28 About Getting started Daily use
ProWax filter
Options Tinnitus Warnings More info
Replace ProWax miniFit fi lter
1. Tool 2. Remove
New
filter
Remove the tool from Insert the empty pin
the shell. The tool has into the wax filter in
two pins, one empty the speaker and pull
for removal and one it out.
with the new wax
filter.
Note
If you use a mold or LiteTip, your hearing care professional must replace the wax filter in the speaker.
3. Insert
New
filter
Final
Old
filter
Empty
pin
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
29