Sound And Led Light Indicators - oticon CROS PX miniRITE R Instructions For Use Manual

Sound and LED light indicators

Different sound indicators help to communicate the status of your
transmitter. The sounds will be transmitted to your hearing aid.
Volume
Start-up volume
Minimum / maximum volume
Volume up / down
ON/OFF Sound
ON
OFF 4 descending tones
Note
The transmitter volume sounds are high pitched. The high pitch distinguishes the transmitter sounds from the
sounds of your hearing aid.
Long GREEN blink Long ORANGE blink
54 About Getting started Daily use Warnings
Sound
2 beeps
3 beeps
1 beep
LED light
More info
Warnings Sound
3 alternate
Low battery
beeps
4 descending
Battery shut down
tones
Microphone service check
8 beeps
needed
repeated 4 times
The transmitter's LED light
does not turn ON when the
transmitter is placed in the
charger
The transmitter's LED light
blinks ORANGE when the
transmitter is placed in the
charger
The transmitter's LED light
blinks GREEN when the
transmitter is placed in the
charger
Note
The transmitter warning sounds are high pitched. The high pitch distinguishes the transmitter sounds from the
sounds of your hearing aid.
Short GREEN blink Long ORANGE blink
LED light LED light comments
See the Trouble-
Turned OFF
shooting section
Continuously blinking.
See the Trouble-
shooting section
Continuously
blinking. See the
Troubleshooting
section