Computer Configuration Requirements; Scannable Objects; Hardware; Hardware Profile - Revopoint 3D Technologies POP Product Operation User Manual

Special object scanning
Outdoor scanning
Scanner weight
Dimensions (mm)
Printable data output
Required computer configurations
Wifi
Note

1.4 Computer configuration requirements

Recommended configuration: Graphics card memory >2GB; i7-6700 processor; 16GB RAM, USB3.0

1.5 Scannable objects

A single-frame scanning range of the 3D scanner is 210mm x 130mm, and the scannable object size is from
50×50×50 (mm) to 2m.
Hair or flakes cannot be scanned directly. When scanning some objects (such as human face), you need to keep the
objects still.
If the scanned object doesn't have enough shape features, you need to stick marker points on its surface for alignment.
Transparent and highly reflective objects cannot be scanned directly, unless powder is sprayed.

2 Hardware

2.1 Hardware profile

USB data and power supply port
Product Operation User Guide
For the transparent and highly reflective objects, please spray powder
before scanning
Cover is needed to avoid interference of strong light
≤100g
154.6x38.2x25.6
Able to export 3D model directly to 3D printing
Windows 8\10, 64-bit
2.4G
*The aforesaid accuracy is acquired in standard lab environment, which
might vary subject to actual operating environment.
2