Network Streaming Configuration - GDC Standalone IMB SX-4000 User Manual

1
This configuration option allows video and audio to be buffered for a fixed amount of time before
playback. (Recommended value: 5 seconds). Increasing this value is only needed on unstable
connections.
This configuration option allows audio to be delayed, for cases where source audio and video are out of
2
sync. Both positive and negative audio and video playback. (Recommended value: 0 frames).
Setting the 'PTS sync' option will force playback to use the Presentation TimeStamp (PTS) header in
3 the IP Stream to synchronize audio and video playback. (Recommended: unchecked)
Note: Using this option will use a new mechanism to sync audio and video playback. 'Unchecked' is the
same method as used in prior software versions and is recommended. Check this option only if default
unchecked method fails to achieve proper audio and video sync

7.1.2 Network Streaming Configuration

1
2
September 26, 2016
Figure 146 Streaming Tab.
- 163 -
7. APPENDIX
SX-4000 Standalone Integrated Media Block™
User Manual