Calibrate Touchscreen - GDC Standalone IMB SX-4000 User Manual

5. ADMIN PANEL
1
Select
2 If

Calibrate Touchscreen

seen in Figure 133.
3
Touch the blinking symbol until it stops. Continue touching the blinking symbols on each of the
four (4) corners of the screen to complete the calibration of the touchscreen.
SX-4000 Standalone Integrated Media Block™
User Manual
5.3.4.3. Calibrate Touchscreen
Figure 132 Touchscreen [Calibrate Touchscreen].
Calibrate Touchscreen.
is selected when in
Figure 133 Calibrating the touchscreen by 4-pt calibration method.
TK USB screen, the screen will appear as
- 150 -
1
2
3
2
September 26, 2016
2
2