Setting Up The Mda Configuration File - GDC Standalone IMB SX-4000 User Manual

7. APPENDIX
Note: A valid MDA configuration file must be set before playback with MDA internal
decoding.
Take note of the server IP address, and load the MDA configuration
webpage http://<server_IP>/cgi-bin/mdaConfig
For example, if the server IP address is '192.168.0.139', load the webpage
http://192.168.0.139/cgi-bin/mdaConfig.
The MDA configuration web page will be shown as follows:
Use the 'Upload MDA configuration' section to upload MDA configuration files from the
PC to the SX-4000 Immersive Sound Media Server.
Note: MDA configuration files must be named in the format 'mda-<XXX>.cfg'.
The 'Select MDA configuration' section can be used to select the active MDA
configuration from uploaded configuration files. In the example below, the sample 'mda-
51.cfg' configuration has been set to be used for playback.
SX-4000 Standalone Integrated Media Block™
User Manual

7.3.2.2 Setting up the MDA configuration file

Figure 149 MDA Configuration Manager
on a PC connected to the server.
- 170 -
September 26, 2016