Getting Started; One I/O - Waves DiGiGrid IOC User Manual

Getting Started

Configure SoundGrid and assign your devices as follows, however large or small your system.
Connect the hardware
Install the software
Configure your system
C H
ONNECT THE

One I/O

In this example, one DiGiGrid IOC is connected directly to the SoundGrid host computer using a Cat 5e Ethernet cable or
better. This provides plugin processing and/or DAW playback/recording via the SoundGrid ASIO/Core Audio driver.
The host computer's LAN port that's connected to the SoundGrid network should be used for SoundGrid only. Do not
share this port with the internet or other networks.
In this configuration, all plugin processing is carried out on the host computer. The speed and power of the host defines
overall latency.
6
ARDWARE
Host computer with SoundGrid application
SoundGrid I/O device
DiGiGrid IOC / User Guide