Extron electronics RGB 460xi Series User Manual page 15

im Vertrieb von CAMBOARD Electronics
DIP switches — This bank of DIP switches, as illustrated below,
1
controls sync on green output, composite sync output, DDSP
(Digital Display Sync Processing), serration pulse output,
vertical sync pulse width, and composite sync routing. Moving
a switch up will set it to "On" and moving it down will set it to
"Off".
1 — Sync on green
Off — The interface outputs separate horizontal and
On — The interface outputs sync on green (RGsB).
2 — Composite sync — This switch controls composite sync
output.
Off — The interface outputs RGBHV or RGsB video.
On — The interface outputs combined horizontal and
3 — DDSP (Digital Display Sync Processing) — This feature
may be necessary for digital display devices such as LCD,
DLP (digital light processing), and plasma displays. Use
this option if the image is not displayed properly after
other options, such as serration pulse and vertical sync
pulse width, have been explored.
Off — The interface performs sync processing operations,
On — The interface uses DDSP instead of ADSP.
4 — Serration pulse — Many LCD and DLP projectors and
plasma displays must have serration pulses removed from
the sync signal in order to display the image properly.
Flagging or bending at the top of the video image is a sign
that the serration pulses should be removed.
Off — The interface does not output serration pulses.
On — The interface outputs serration pulses in the vertical
www.camboard.de Tel. 07131 911201
RGB 460xi Series • Installation and Operation
Fax 07131 911203
Closed / On
Open / Off
The default for all DIP switches, except for switch 7, is
Off (down).
vertical sync (on the H and V connectors) for
RGBHV.
vertical sync for RGBS.
such as centering, with ADSP.
DDSP does not process the sync signal.
DDSP disables the horizontal shifting control.
sync interval.
ce-info@camboard.de
2-7