Tube Compatibility Chart; Determination Of G-Values - VWR Clinical 100 Instruction Manual

Tube Compatibility Chart:

Determination of G-Values:

The centrifuging radius of the rotor is 8.5cm. See the tube compatibility chart for the correct radius
when using adapters and smaller tubes. The chart on the next page can be used to determine g-values.
To use this chart, find the radius value on the radius scale. Place the edge of a ruler on the value. Place
the right side edge of the ruler on the speed scale at the desired speed. The estimated RCF can then be
read from the RCF scale where the ruler edge passes through it. This chart can also be used to
determine the proper speed for the desired RCF value.
VWR Collection Manual ver 1, rev 4 28.2.2011 13