Hardware Setup; Required Parts - Fujitsu MB91F465XA Application Note

2 Hardware Setup

The chapter describes the setup of the Emulation system

2.1 Required parts

To Emulate the MB91F456XA series following parts are required:
1. MB2198-01 Emulator Main Unit
2. MB2198-10: DSU4 cable
3. EMA-MB91V460A-00x:
4. EMA-MB91V460A-100:
5. EMA-MB91F465X-NLS-100M20:
6. NQPack100SD-ND:
On the target system a NQPack100SD-ND socket is required enabling connection to EMA-
MB91F465X-NLS-100M20 board.
2
© Fujitsu Microelectronics Europe GmbH
MB91F465XA EMULATION
Chapter 2 Hardware Setup
Adapter board, including MB91V460A
FlexRay extension board, including MB88121B
Socket adapter board
Socket for package FPT-100P-M20
(Tokyo Eletech Corp. www.tetc.co.jp/e_tet.htm)
Figure 2-1: Hardware Parts
- 7 - MCU-AN-300015-E-V11
1
3
5
4