Section 3. Installing The Pos System; Installing The Pos System; Finding The Right Location To Install The Pos System; Figure 5. Angle View Of The Pos System - Hisense HK870 Series System Integration Manual

Section 3. Installing the POS System

Installing the POS System

This section provides the steps to install the POS system, connect peripherals and the DC power
supply cable.

Finding the right location to install the POS system

It is important to choose a safe and secure place to install the terminal.

Choose a desk or table big and strong enough to support the weight of the system and
peripherals.

Choose a flat, hard surface. Carpeted area can generate static electricity that can alter
memory or damage system components.

Make sure to install the system in a well-ventilated place and keep the space free around the
system.

Choose appropriate environmental conditions such as cool and dry places. Avoid humid and
dusty places. Also avoid direct sunlight, rapidly changing temperatures, or placing the system
near heat sources.

Select the appropriate voltage. Connect all the equipment into an isolated outlet to prevent
static electricity and short circuit.

Choose a location where sufficient power outlets are available for printers and other
peripheral devices.

Do not install the POS system near electromagnetic and electrical devices, such as phones
and electric motors, that can cause system damage.

The socket-outlet should be installed near the equipment and easy to access
Hisense HK870 Series All-in-One POS System Integration

Figure 5. Angle view of the POS system

.
ManualPage 12 of 41